youtube facebook twitter  
  Instrument Division
繁體中文 / 简体中文 / English  
Software
    >>Trigger Function Home / Software /
 Trigger Function
 Signal Process
 Other
 I2C-SPI Control Center
- Pulse Width Trigger / Multi-level Trigger / Interval Trigger -


Pulse Width Trigger

Users can set the positive/negative pulse width in the signal as the trigger condition.

Figure 1: Pulse width setting window.

 

Users can set the width time according to the signal’s condition requirement. As figure 1 shows, set the range to 3us-4us and press “Enter”, the Logic Analyzer will start signal capturing and trigger if the condition 3us-4us is met.

Figure 2: The trigger happens at 3.88us.

 


Multi-level Trigger

(video - Multilevel Trigger)

B Series provide three trigger functions: Multi-level Trigger, Interval Trigger, Pulse Width Trigger.

Figure 1: Multi-level trigger setting window.

 

For setting the multi-level trigger, LAP-B(70256) has eight different trigger conditions, and LAP-B(702000) has sixteen. The trigger condition can be set as specified value or edge.


Interval Trigger

Figure 1 shows a part of continuous data, but in it the data length of each section is different.

Figure 2: Data sequence.

 

For example: set the trigger condition as 0X01 and 0X05, and the interval as 0.5ms-1.5ms. In the data sequence, sections meeting 0X01 and 0X05 are A1-T1 and A2-T2; but only the 0X01 and 0X05 in A2-T2 meet the set interval, so the Logic Analyzer will trigger at T2.

 
Copyright ZEROPLUS TECHNOLOGY CO., LTD.