Logic Analyzers-Zeroplus
  youtube facebook twitter  
  Instrument Division
繁體中文 / 简体中文 / English  
    >>Trigger Function Home / LAP-C Standard /
 Trigger Function
 Signal Process
 I2C-SPI Control Center

Level Trigger / Edge Trigger

It has six trigger conditions: Don’t Care, High, Low, Rising Edge, Falling Edge and Either Edge.


The Logic Analyzer captures the waveform according to the trigger condition. For example: if the trigger condition is set as rising edge, then the Logic Analyzer will judge whether there is rising edge or not in the signal; if there is, the Logic Analyzer will trigger. Below figures are display modes of different trigger conditions.

Figure 1: Trigger at rising edge.


Figure 2: Trigger at falling edge.


Figure 3: Trigger at high.


Figure 4: Trigger at low.