Brief Introduction of the Application: Protocol Analyzer I2C is the Serial Bus and consists of the SDA and the SCL. It can be used to transmit and receive the data, for example, it can be used for the bidirectional Data Transmission between the CPU and the controlled IC or between both ICs. The Transmission Speed is 100Kbit/s in the Standard Mode, and it can be up to 400Kbit/s in the Fast Mode and 3.4Mbit/s in the High-speed Mode. The data is transmitted by the Master-to-Slave Device. A Protocol Analyzer I2C is allowed to have multiple Master Devices and Slave Devices, but at the same time, only one Master Device is allowed to operate. Function Introduction: Protocol Analyzer I2C(EEPROM 24LCS61/24LCS62) of Zeroplus Technology can be used to analyze the signal of the I2C(EEPROM 24LCS61/24LCS62) and the packets (such as Start, Address, Data, Read/Write, ACK/NACK, Control, OE, Device ID, Assign Address, Clear Address, SN, Set Write Protection Fuse and Stop) in the corresponding signal. With the help of the ZEROPLUS Protocol Analyzer I2C (EEPROM 24LCS61/24LCS62), the packet of the Protocol Analyzer can be displayed with the graphical mode, the working efficiency can be improved and the time of calculating the decoding manually can be saved during the development. 【DOWNLOAD】