New Funtions 1. Support the Wide-screen Display and Double-screen Display Wide-screen Display: The resolution of the displayer is above 1024*768. When the Display Width of the waveform becomes wider, the number of the displayed Waveform is fixed in the former Version. But in the V3.08 Software, the number of the displayed Waveform will be automatically adjusted according to the Display Width of the Screen. Double-screen Display: The V3.08 Software can support the Double-screen Display with which the software can display more waveforms. Fortified Functions 1. Support the SDK for the Data Contrast “Open the SDK for the Data Contrast”, it means that our Logic Analyzer Software has the function of the Data Contrast and we provide the SDK for users modifying the function of the Data Contrast according to their requirements; the Data Contrast Interface which is designed by users will be supported by the main program. 2. Support the Analysis of the Multi-page, Multi-device and Multi-sector in Memory Analyzer Specifically, Protocol Analyzer SAMSUNG K9 (NAND Flash) can support the Multi-page function; Protocol Analyzer SCCB can support the Multi-device function; Protocol Analyzer Compact Flash 4.1 can support the Multi-sector function. 3. Support more languages for the Software The software will add other new languages in the V3.08 besides the Chinese Simplified (Si), Chinese Traditional (Tr) and English. And the new languages will be issued by way of the independent Installation File. When users install the program of other new language, the software will inspect the program automatically and supply the language for users to switch. 4. Open the function of Pulse Width Trigger Module for all the LAP-C Series Modules The function of the Pulse Width Trigger Module can be used in all the LAP-C Series Modules, but users need to register before using this function. 5. Open the function of Protocol Analyzer Trigger for all the LAP-C Series Modules All the LAP-C Series Modules can use the function of the Protocol Analyzer Trigger. However, LAP-C (16032), LAP-C (16064), LAP-C (16128), LAP-C (162000), LAP-C (32128), LAP-C (321000) must register before using this function. For the LAP-C (322000), it is not necessary to register as it can use this function for free. Modification Functions 1. In the Double Mode, when the Trigger Position is 100%, there is an error in the Trigger Point, T Bar. Before Modification: The T Bar is not in the correct position; there is an error. After Modification: The T Bar has been in the correct position. 2. For the Data Contrast dialog box, when the File Name is too long, only a part of the name can be displayed. Before Modification: When the File Name is too long, it can’t be displayed completely. After Modification: When the File Name is too long, it will be displayed with the ToolTip. 3. It cannot take effect when setting the function, “Read the Captured Data”, in the Customize dialog box; it is necessary to press the Restore Defaults button to enable this function. Before Modification: The function, “Read the Captured Data”, cannot be enabled until the Restore Defaults button in Customize dialog box is pressed. After Modification: The function, “Read the Captured Data”, can be used. 4. Select the option, “Keep the Present Data” in the Customize dialog box, and then repeatedly trigger and save; press the Stop to close the current file, and then open it again; the unknow data is wrong in the file. Before Modification: When the RAM Size is lower than 64K, repeatedly trigger and save; press the Stop to close the current file, and then open it again; the unknow data is wrong in the file. After Modification: When the RAM Size is lower than 64K, repeatedly trigger and save; press the Stop to close the current file, and then open it again, the unknow data is correct in the file. PS: The software only supports 2000/XP/Vista32/Windows 7(32-Bit) systems at present. LAP-C(16032)_Standard_V3.08 for 2000、XP、Vista32、Windows 7 【DOWNLOAD】 LAP-C(16064)_Standard_V3.08 for 2000、XP、Vista32、Windows 7 【DOWNLOAD】 LAP-C(16128)_Standard_V3.08 for 2000、XP、Vista32、Windows 7 【DOWNLOAD】 LAP-C(162000)_Standard_V3.08 for 2000、XP、Vista32、Windows 7 【DOWNLOAD】 LAP-C(32128)_Standard_V3.08 for 2000、XP、Vista32、Windows 7 【DOWNLOAD】 LAP-C(321000)_Standard_V3.08 for 2000、XP、Vista32、Windows 7 【DOWNLOAD】 LAP-C(322000)_Standard_V3.08 for 2000、XP、Vista32、Windows 7 【DOWNLOAD】