New Functions： 1. Add a new model, LAP-B (702000+). LAP-B (702000+) has enhanced the sampling rate. According to the different sampling rate and the different number of Channel, there are two modes added. The two modes can be switched by the software. The followings are the two added modes. 32-Channel Mode: The max. sampling rate is 500MHz; the max. RAM size is 4M; the available channels are 32. 16-Channel Mode: The max. sampling rate is 1000MHz; the max. RAM size l is 8M; the available channels are 16. 2.Bar Width and Connection Settings In virtue of Bar Width and Connection Settings, users can move more than one bar at the same time and set the width between bars when the Bars of Logic Analyzer are going to be connected. 3.Mark Function of the Bar State The Bar States are displayed according to the Bus Package formats, and the displayed results can be shown below the tool column, the same as the Time Interval. Emphatic Functions: 1.Add the function of Error Tolerance in the Data Contrast dialog box 2.Add the function of finding contrast results in the Data Contrast dialog box 3.When the conditions of Color Configuration in the General Bus are set, the settings won’t be deleted during the process of Run. 4.The channel can be continuously renamed by the Up and Down arrow key. 5.Users can set The Allowed Trigger Mark Bar in Trigger Mark Setting (click Properties firstly, then Trigger Range, users can find Trigger Mark Setting) as their requirements. Clicking Trigger Mark can only activate Trigger Mark; the default of The Allowed Trigger Mark Bar is 128. LAP-B(70256)_Standard_V3.05 for 2000、XP、Vista32 【DOWNLOAD】 for Vista64 【DOWNLOAD】 LAP-B(70256L)_Standard_V3.05 for 2000、XP、Vista32 【DOWNLOAD】 for Vista64 【DOWNLOAD】 LAP-B(702000)_Standard_V3.05 for 2000、XP、Vista32 【DOWNLOAD】 for Vista64 【DOWNLOAD】 LAP-B(702000L)_Standard_V3.05 for 2000、XP、Vista32 【DOWNLOAD】 for Vista64 【DOWNLOAD】 LAP-B(702000+)_Standard_V3.05 for 2000、XP、Vista32 【DOWNLOAD】 for Vista64 【DOWNLOAD】