Updated: 1. Fixed the crash problem when opening compressed and captured data under Win10. Before Update: When compression is enabled under Win10, there is a crash when retrieving data. Updated: Open compression under Win10, and data can be captured normally. 2. Modify the memory of 64M, in some cases there is no waveform display in the waveform area. Before Update: 64M memory, there is no waveform in the waveform area in some cases. Updated: The waveform can be displayed normally. 3. When using split screens, it can be adjusted according to the different configurations of the top, bottom, left, and right sides of the screen. Before Update: When there are split screens, the top, bottom, left, and right configurations are not supported. Updated: Support top, down, left and right configuration. 4. UART protocol adds waveform inversion decoding and data decoding inversion processing. Before Update: Waveform inversion decoding and data decoding inversion processing are not supported. Updated: Support waveform inversion decoding and data decoding inversion processing. 5. SPI protocol may crash when modifying the custom decoding function. Before Update: There will be a crash when using the custom decoding function. Updated: It can be decoded normally when using the custom decoding function. 6. Can Bus fixes the problem of incomplete decoding in some cases. Before Update: Decoding is not complete. Updated: Normal decoding. 7. MII protocol adds 10M decoding mode processing under RMII. Before Update: The decoding method of 10M decoding under RMII is not supported. Updated: Support the decoding method of 10M decoding under MII.