Updates 1. Modify USB packet filtering, a packet will sometimes not show the issue. Before update: With USB packet filtering, packets are sometimes not displayed. Updated:: the packet can be displayed normally. 2. Modify the real-time monitor function for display flashing. Before update: Does not automatically adjust the monitor frequency so that monitor function displays blinking. Updated:: The monitor function isn’t blinking. 3. Querying pulse width only supports 16-bit range, increased to 32-bit support. Before update: Querying pulse width range only supports 16 bits. Updated:: Querying pulse width is increased to 32-bit support. 4. Modify the software sampling parameters, not capture the data for direct storage purpose, there’s no storage purpose, for parameters. Before update: Modify the software sampling parameters, not capture data for direct storage purpose, there’s no storage purpose, for parameters. Updated:: Set the sampling parameters, not capture data for direct storage purpose, parameter value is reserved.