Modified Functions 1. When selecting the address for Waveform Export, the input value of customized address is invalid . Before Modification: The input value is invalid. After Modification: The value can be input normally. 2.For LAP-C(162000), the sampling frequency is set as 160KHz and the trigger position is set as 0% in the Double Mode, the waveform is displayed error. Before Modification: The waveform is displayed with UNKOWN at times. After Modification: The waveform is displayed correctly. 3.When the trigger position is 0% in Signal Filter, the first filtered data is incorrect. Before Modification: The first filtered data is incorrect. After Modification: All the data is correct. 4.Add the customized contrast range in the Data Contrast function. Before Modification: Non. After Modification: The customized contrast range is added. 5.When selecting the Double in 32CH Modules, the displayed channels can’t be updated in time. Before Modification: The displayed channels can’t be updated in time. After Modification: The displayed channels can be update in time. 【DOWNLOAD】