New Functions 1. Support the Data Format of Protocol Analyzer Before Modification: Non-support. After Modification: Support the Data Format of Protocol Analyzer. 2. Support the Data Fragment Output function Before Modification: Non-support. After Modification: Support the Data Fragment Output function. 3. Support the Real-time Monitoring ( Logic Mode& Frequency Mode) Before Modification: Non-support. After Modification: Support the Real-time Monitoring ( Logic Mode& Frequency Mode). 4. Support the NI-VISA(Tektronix Models: TDS1000/1000B/2000/2000B/5000B)) Before Modification: Non-support. After Modification: Support the NI-VISA. 5. Support the LAP-A Series Models Before Modification: Non-support. After Modification: Support the LAP-A Series Models. Enhanced Functions 1. Pulse Width Trigger Module Before Modification: There is not to register for the LAP-16032U, LAP-16064U, LAP-16128U, LAP-32128U-A, LAP-321000U-A, LAP-C(16032), LAP-C(16064), LAP-C(16128), LAP-C(162000), LAP-C(32128), LAP-C(321000). After Modification: All the LAP-A Series Models are free. Enhanced Functions 1. The Filter function of Software causes the error Filter Condition of some channels. Before Modification: A part of Filter Conditions are error. After Modification: The Filter Condition is correct. 2. The torlerance error of Data Contrast causes the error statistics. Before Modification: The torlerance error is juged incorrectly. After Modification: The torlerance error is modified. 3. In the part of modifications, the S/N can’t be read by PC in random. Before Modification: The S/N can’t be read. After Modification: The S/N is read correctly. 4. The Background Color is white, and the Background Color of Bus is black when activating the Latch function. Before Modification: The Background Color of Bus is black. After Modification: The color is the same with the background color of main program. 5. The setting values of the Trigger Range is invalid. Before Modification: The setting values is invalid. After Modification: The setting values can be used normally. 6. The Full Screen can’t be updated when capturing the signal repetitively. Before Modification: The Full Screen can’t be updated when capturing the signal repetitively. After Modification: The Full Screen can be updated in time. 【DOWNLOAD】