Modified Functions 1. Activate the Reverse function firstly, then click Run, the waveform can’t be reversed. Before Modification: Activate the Reverse function firstly, then click Run，the waveform can’t be reversed. After Modification: The waveform can be reversed normally. 2. The same function has more than two versions, the on-line update tips appear every time. Before Modification: The same function has more than two versions, the on-line update tips appear every time. After Modification: The online update tips don’t appear. 3. When downloading the newest RPD to start configuring, the same function can be displayed repetitively in the Configuration Table after finishing the configuration. Before Modification: The same function can be displayed repetitively. After Modification: The same function can be displayed once. 4. When one function is removed from the Configuration Table, the removed function is kept in the Table when activating the Configuration Table. The function can be removed when the software is activated in the next time. Before Modification: The information in the Configuration Table is displayed error. After Modification: The Configuration Table should be updated in time when the fucntion is updated. 5. When the Compression function is activated in the LSFC, and then switch to HSFC, the Compression is selected. Before Modification: When the LSFC is switched to HSFC, the Compression is selected. After Modification: The Compression can’t be used and selected in the HSFC. 6. When turning off the Power in the process of programming, the software will be closed when there are two tips. Before Modification: When turning off the Power in the process of programming, the software will be closed when there are two tips. After Modification: When the programming is failed, the software can’t be closed. 7. The wirtten and cleared data can’t be read to do contrast(Including Base Function Check). Before Modification: The wirtten and cleared data can’t be read to do contrast. After Modification: Read the wirtten and cleared data to do contrast, in order to make sure the written data is correct. 8. There isn’t the Log file to record the relative operations of hardware. Before Modification: There isn’t the Log file to record the relative operations of hardware. After Modification: Add the Log file to record the relative operations of hardware. 9.The Base Function doesn’t be checked after the write operation is finished. Before Modification: The Base Function doesn’t be checked after the write operation is finished. After Modification: The Base Function must be checked after the write operation is finished. 10.When the firmware function of the hardware can’t be found, there is no tips for user and the new Configuration Table is created directly. Before Modification: There is no tips for user and the Configuration Table is created directly. After Modification: It will prompt user whether to import, creat the Configuration Table or exit. 【DOWNLOAD】