Modified Functions 1. Support DSO stacking with GWinstek GDS-1000 and GDS-3000 Series. 2. Support DSO stacking with Agilent DSO5000 Series. 3. Support DSO stacking with PicoScope 3000 Series. 4. Support DSO stacking with OWON SDS7102, Tektronix 3000 and 6000 Series. 5. Support image encode. 6. Support DSO stacking with BK oscilloscope(2540B，2542B，2540B-GEN，2542B-GEN). 7. Support suspending during data exporting and the exported file's size can be self-defined. 8. The contrast range can be self-defined in Data Contrast. 9. The problem that the available channels are not refreshed immediately after Double is selected for 32CH models is modified. 10. The problem that the filtering for the first data is not accurate if the trigger position is 0% is modified. 11. The problem that sometimes the waveform is all UNKNOWNs if frequency is 160KHZ and trigger position is 0% in the Double mode of LAP-C(162000) is modified. 12. The problem that the self-defined address is not valid during waveform exporting is modified. 13. SD Memory analysis problems are modified. 14. The problem that the Bus can't be grouped normally for the second LA in the channel stack of multi-stacking is modified. 15. The problem that only A0 can set the OSTM if DUT is set as the condition for the Pulse Width Module is modified. 16. Optimize the real-time monitor, the frequency mode cannot measure the low-level signal. 17. Downward compatibility for files in the same series. 【DOWNLOAD】