《孕龍科技電子報》第15期 2010年6月10日出刊 If you cannot read this email in Chinese, please change the font type set up to Chinese Big 5 with your browser.
SCCB匯流排定義了三種不同的傳輸狀態,分別為:
3 Phase write transmission cycle – 3 Phase 寫入傳輸 2 Phase write transmission cycle – 2 Phase寫入傳輸 2 Phase read transmission cycle – 2 Phase 讀取傳輸
「3 Phase write transmission cycle」是一種完整性的寫入動作,1st Phase表示ID Address,由主裝置指定與哪一個從裝置進行傳輸,2nd Phase 表示Sub address,指定該ID Address底下欲存取的暫存器位址,3RD Phase表示Write Data,傳送欲寫入的資料,此時3RD Phase中第9bit為Don’t care bit。圖四為「3 Phase write transmission cycle」示意圖。
圖四:3 Phase write transmission cycle
「2 Phase write transmission cycle」是替「2 Phase read transmission cycle」指定Sub address而進行的一個位址寫入動作,在2nd Phase中第9bit同樣為Don’t care bit。圖五為「2 Phase write transmission cycle」示意圖。
圖五:2 Phase write transmission cycle
「2 Phase read transmission cycle」本身並無法判斷Sub address,必須依靠「3 Phase write transmission cycle」或「2 Phase write transmission cycle」進行Sub address確認,在2nd Phase中第9bit為NA bit。圖六為2 Phase read transmission cycle示意圖。
圖六:2 Phase read transmission cycle
孕龍科技所推出的SCCB匯流排解碼模組,能夠將訊號中的封包顯示於軟體中,圖七為解碼軟體圖片。
圖七:SCCB匯流排解碼模組
波形顯示區: 內可看到SCCB匯流排解碼模組將SCCB訊號封包解碼出來。 封包列表: 則是將波形顯示區內的封包以直列方式顯示,如此更能了解SCCB訊號封包傳遞狀況。 記憶體分析: 則可清楚表示ID_Address及 Sub_address內資料的Read/Write狀況。
孕龍科技即將研發全新產品-信號產生器 (Pattern Generator) 請問您所需要的信號產生器的頻率、通道和記憶體等為何呢?
主程式: LAP-A V3.08 LAP-A V3.08 for Vista64 LAP-B V3.05 LAP-B V3.05 for Vista64 LAP-C V3.09 LAP-C V3.09 for Vista64 匯流排協定分析軟體下載 使用手冊、更新資訊、規格書
Copyright © ZEROPLUS TECHNOLOGY CO., LTD. 孕龍科技股份有限公司 版權所有 23585台北縣中和市建八路123號2樓 | 儀器事業處 台北業務部:+886 2-66202225#201 新竹業務部: +886 3-5426637#87
www.zeroplus.com.tw